Tekstielvesel Inleiding

Definisie
Fiber is inartificial or synthetic filament. Textile fiber is the fiber which is the raw material of cloth.

Characteristics of textile fiber
Textile fiber has good physical characteristics including length, fineness, elastisiteit, brute force, ens. It also has good chemical stability. For example cotton, feather, kant, hemp and other natural fibers are ideal textile fibers.

Category of textile fiber
Textile fiber is classified into natural fiber and chemical fiber.

Natural fiber contains vegetable fiber, animal fiber and mineral fiber.
Vegetable fiber: katoen, hennep, fruit fiber, ens.
Animal fiber: wool, rabbit hair, kant, ens.
Mineral fiber: asbestos.

Chemical fiber includes regenerated fiber, synthetic fiber and inorganic fiber.
Regenerated fiber: viscose fiber, cellulose acetate fiber.
Synthetic fiber: nylon, polyester, acrylic, spandex, vinylon, polypropylene, ens.
Inorganic fiber: fiberglass, metal fiber, ens.

Textile performance of common textile fiber
wol: Wool has good absorption of moisture and elasticity. It is suitable for acidic dyes and metal binding dyes.
Silk: Silk has good absorption of moisture, breathability and high glossiness. It is suitable for acidic dyes.
katoen: Cotton has good breathability, absorption of moisture. It is suitable for basic dyes, sulfide dyes and reactive dyes.
Viscose fiber: Viscose fiber has good breathability, absorption of moisture, various colors, lae koste. The properties of viscose fiber are similar to natural fiber. It is suitable for dyes.
polyester: Polyester has good wearing resistance. It is suitable for disperse dyes, diazonium disperse dyes. Polyester can dissolve in vat dyes.
nylon: Nylon has good wearing resistance and bad breathability. It is suitable for acetic dyes and disperse dyes.
Polyacrylonitrile fiber: Polyacrylonitrile fiber is suitable for disperse dyes and cationic dyes.

How to distinguish fibers
The ways to distinguish fibers include feelings, visualization, combustion, microscope, dissolution, drug coloring and infrared spectroscopy.

Distinguishing procedures:
Uses combustion to distinguish natural fiber and chemical fiber.
If it is natural fiber, using microscope can distinguish vegetable fibers and animal fibers. If it is chemical fiber, distinguish it by combining with its melting point, proportion, refractive index and solubility.
When distinguishing mixed fiber and mixed yarn, use microscope to confirm various fibers. Then use other methods to distinguish in further.
For colored fibers, dyes should be peeled in advance to guarantee reliability.

Mexiko aangekondig Nuwe Etikettering Reëls vir tekstiele,en

Mexico government enforced new law of the label for textiles and clothing. The new law is applied for garments, garment accessaries, textiles and home textile products whose textile ingredients accounting for more than 50% of the whole weight. Many products are not restrained by the rules, such as fabric-made toys, suit, furniture, badges, flags, zippers, buttons, buckles, gloves, cosmetic bags etc.

The label rules are very detailed and contain a series of requirement and exception. In die algemeen, garments and garment accessaries must carry permanent, clear labels on the collar, waist or other obvious parts. The labels must list brand name, fiber content, size, maintenance instructions, original country information etc in Spanish.

For individual should indicate the name and address of manufacturer or importer. For legal entity should indicate the name and address of manufacturer or import company. This information must be included in the permanent labels, temporary tag or on product packaging. For hosiery, headband and bracelets, the above information can be included in a permanent or temporary labels on the product itself, or on the package.

Home textiles labels must also include the above information, except that using dimensions instead of Sizes. The following products must be labeled with permanent labels containing this information: sheets, blankets, bed sheet, bedspread, table cloth, eat mat, napkin, finished curtains, towels, mattresses and mattress with textile materials. Except bedspreads and blankets, the sizes, manufacturers and importers information must be listed on temporary labels.

For handbags, luggage boxes, beursies, suitcases, backpacks, umbrellas, seat cover, cushion, cleaning supplies, diapers, oil painting canvas, daily necessities, bathroom furniture, some retail fabric and other various products, the name and address of manufacturer or importer must be labeled. For disposable items, this information can be displayed on the product packaging.

Ontfouting van Double omsendbrief brei masjien

1.Upper dial and lower syringe adjustment

  • Loosen lower syringe and lifting ring on machine. Use dial gage to adjust concentricity of syringe to grail. Adjust and lock eccentric positioning wheel. Toe, lock the screws.
  • Loosen all of connecting screws on feet and pot.
  • Put dial gage on the surface of upper dial. Gauge outfit points to external diameter of lower syringe. Adjust regulating screws on the feet to make reading of dial gage less than 0.05mm.
  • Lock connecting screws on pot. Reading of dial gage should be kept below 0.05mm.

2.Roughness of upper dial and lower syringe adjustment

  • Adjust the gap between upper gear of main transmission and gear on pot.
  • Put dial gauge on the lower syringe. Gauge outfit points to the surface of upper dial.
  • Start machine and observe reading on dial gauge. If reading is higher than 0.05mm, loosen connecting screws on pot. Turn 6 crack screws and put gasket under screws. Lock connecting screws.

3.Needles adjustment

  • Adjust four regulating screws on the gear of main transmission. Rotate gear on pot to an angle. Adjust upper dial and lower syringe to required position.

4. The height of upper dial adjustment

  • Loosen three fastening screws on upper dial. Rotate gear. Then dial will rise. Lock fastening screws after adjustment. Nota: Dial cannot fall too low which may caused damage to needle. Before lowing dial, the height should be low than required height. Then push the dial back to required height in case of damage caused by falling needle when machine starting.

5. Time difference of triangle adjustment

  • Loosen three fastening screws on upper dial. Adjust two screws on the permanent seat of triangle. Then triangle on upper dial will rotate. Lock three fastening screws after adjusting.

6. Triangle adjustment

  • Uniform tension improves the quality of textile. Resetting the position of needles can acquire uniform tension.
  • Use tensioner to measure tension on every yarn.
  • Use hexagon spanner to turn calibrator on triangle
  • Inspect and adjust the tension on every yarn.

7. Needle point adjustment

  • Loosen connecting screws on triangle and lifting ring. Rotate crack screw to raise the whole lifting ring. Put equal gasket under every connecting screws. Then the needle point will rise.

Ontfouting van Enkel omsendbrief brei masjien

Triangle of sinker adjustment

  1. The concave position of sinker should be vertical to raising needle. A 0.5mm gas exits between concave position and needle.
  2. Dial-gauge is absorbed inside syringe. Gauge outfit points to the highest point of sinker.
  3. Loosen screw on triangle. Push the screw forward or backward which drive triangle forward or backward indirectly. Use dial-gauge to inspect the position of triangle. Then lock the screw.
  4. Make syringe rotate. Inspect the position of every triangle.

Sequence of triangle adjustment

  1. The sequence of triangle needs to be adjusted when changing yarn or knitting structure.
  2. Loosen all of the feet on upper case and connecting screws (six grains in total).
  3. Adjust upper case along with the rotating direction of machine, called as decelerating sequence adjustment. Conversely, it is called growing sequence adjustment.
  4. Adjust two adjusting screws on the feet of upper case.
  5. Lock connecting screws.
  6. Eccentric positioning wheel cannot be loosened during operation.

Triangle of needles adjustment

  1. Uniform tension improves the quality of textile. Resetting the position of needles can acquire uniform tension.
  2. Use tensioner to measure tension on every yarn.
  3. Use hexagon spanner to turn calibrator on triangle
  4. Inspect and adjust the tension on every yarn.

Gram weight adjustment

  1. Use hexagon spanner to turn adjusting gear inside indicating ring so that triangle can rise or fall with lifting ring to adjust density of textile.

Marokko is gretig om op China Tekstiel Enterprises

Moroccan Ambassador to China Jafar Hakim expressed that Morocco embassy will issue a one-year long term visa to Chinese businessmen who are interested to invest in Morocco and is willing to provide necessary assistance. This shows that economic cooperation between the two countries is rising up, including textile clothing industry. Textile and apparel industry is the second pillar industry in Morocco. Local Textile and Garment Industry Association hopes to find a Chinese partner to develop the European and American market jointly.

As one of Morocco government’s prior developing industries, textile industry in Morocco has a history of more than 100 jaar. Tans, the number of textile industry employees accounts for 200,000, which is the largest scale of industry employment. Due to close geography and culture, Europe has become the main market of Morocco textile industry.

According to the introduction of Morocco’s Textile and Garment Industry Association chairman Mohamed Tazi, currently, Moroccan textile industry annual output value reaches about 6 billion Euros, of which about 4 billion Euros exported to the European market, en 2 billion Euros sold in local market. It is expected that in the next 10 jaar, textile product consumption of local market will increase to 4 billion Euros.

In order to promote the rapid development of textile industry, Morocco new trade and industry department released the 2025 textile industry planning last year. The main contents include: to increase the scale of production; to improve and update production technology; to enhance regional and international competitiveness. Mohamed Tazi said: “China will become a good partner of Morocco, especially in spinning, weef, accessories and other fields, and will urge us to complete the export target.”

Daarbenewens, he believes in the aspect of enterprise operation cost, China and Morocco are equally matched. “It is also an opportunity for Morocco. Chinese companies can help us improve the industrial chain. Morocco textile industry is full of opportunities, both in production and design fields”